BiosensorsScreen-Printed Electrodes

Electrochemical Competitive Immunoassays: A Practical Route to TRL3

ZP Team
Share

Electrochemical competitive immunoassays are a powerful approach for detecting small molecules and other analytes that can be difficult to measure using conventional assay formats. At Zimmer & Peacock (ZP), we regularly work with researchers, startups, and industrial partners looking to demonstrate proof-of-principle biosensor performance at Technology Readiness Level (TRL) 3.

This article explains how electrochemical competitive immunoassays work, how they generate measurable signals, and why medium-throughput development can accelerate the journey from concept to validated biosensor.

What Is an Electrochemical Competitive Immunoassay?

A competitive immunoassay relies on competition between the target analyte and an electrochemically labelled version of that analyte for a limited number of antibody binding sites.

The starting point is typically a screen-printed electrode (SPE) that has been functionalized with antibodies specific to the target molecule. On its own, an electrode has no selectivity. The specificity comes from the biological recognition elements immobilized on the electrode surface.

Once functionalized, the electrode becomes a true biosensor.

In a competitive assay:

  • A labelled antigen generates an electrochemical signal when it binds to the antibody.
  • The target analyte competes for the same binding sites.
  • As analyte concentration increases, fewer labelled molecules bind.
  • The measured electrochemical signal decreases.

Unlike many sensing systems where signal increases with concentration, competitive immunoassays often generate an inverse relationship between analyte concentration and signal.

Why Competitive Assays Are Useful

Competitive immunoassays are particularly useful for:

  • Small molecules
  • Drug monitoring
  • Food testing
  • Environmental contaminants
  • Metabolites and biomarkers

Many small molecules are too small to support conventional sandwich assay formats, making competitive assays an attractive alternative.

The Source of the Electrochemical Signal

One widely used approach employs:

  • Horseradish Peroxidase (HRP)
  • Tetramethylbenzidine (TMB)
  • Hydrogen peroxide

In this format, HRP catalyses a reaction between TMB and hydrogen peroxide.

The resulting electroactive species can then be measured electrochemically at the electrode surface. The amount of electrochemical signal observed corresponds to the quantity of labelled antigen bound to the antibody layer.

As analyte concentration increases, less labelled antigen binds and the electrochemical signal decreases.

Electrochemical Measurement Techniques

Several electrochemical techniques can be applied to competitive immunoassays.

Amperometry

Amperometry is often the simplest technique for proof-of-concept studies. A fixed potential is applied and the resulting current is measured.

Square Wave Voltammetry (SWV)

SWV provides excellent sensitivity and is commonly used for biosensor development and optimization.

Electrochemical Impedance Spectroscopy (EIS)

EIS can provide valuable information about surface binding events and changes occurring at the electrode interface.

For many TRL3 projects, evaluating multiple electrochemical techniques can help determine the most suitable measurement method.

Why We Recommend Screen-Printed Electrodes in Sheet Format

At ZP, we encourage developers to think beyond proof-of-concept and consider future scale-up from the start.

Screen-printed electrodes are manufactured in sheets or rolls rather than as individual devices. For this reason, we frequently recommend purchasing electrodes in sheet format.

Benefits include:

  • Lower cost per sensor
  • Easier transition to manufacturing
  • Compatibility with medium-throughput workflows
  • Better understanding of scale-up requirements

Recommended Electrodes

🔹 Screen-Printed Electrodes
https://shop.zimmerpeacock.com/en-gb/collections/bare-electrodes

Many electrochemical immunoassay projects begin with:

  • Carbon 501 Screen-Printed Electrodes
  • Gold Screen-Printed Electrodes

Both platforms are suitable for biosensor functionalization and assay development.

Medium-Throughput Biosensor Development

At ZP, we favour a medium-throughput development philosophy.

Rather than testing individual sensors one at a time, medium-throughput workflows allow multiple sensors to be functionalized, tested, and analysed in parallel.

This provides a balance between:

✅ Development speed
✅ Data quality
✅ Reproducibility
✅ Cost effectiveness

Our internal workflows support efficient sensor preparation, testing, and data processing while maintaining high-quality experimental control.

What Success Looks Like at TRL3

TRL3 represents a proof-of-principle stage.

The goal is not manufacturing readiness, regulatory approval, or product launch.

Instead, the objective is to demonstrate:

  • A measurable electrochemical response
  • A clear relationship between analyte concentration and signal
  • Preliminary specificity
  • Early reproducibility

At this stage, larger error bars can be acceptable provided the underlying signal trend is clear and scientifically credible.

The essential question is:

Does the immunosensor work and does the signal behave as expected?

If the answer is yes, the project can progress to further optimization and higher technology readiness levels.

Efficient Data Analysis Matters

Generating electrochemical data is only part of biosensor development.

Modern projects often generate large datasets that must be processed, compared, and interpreted efficiently.

At ZP, medium-throughput development is supported by the Djuli cloud platform, enabling streamlined electrochemical analysis and data handling.

🔹 Djuli Cloud Platform
https://djuli.zimmerpeacock.no/

Getting Started

If you are developing an electrochemical competitive immunoassay, a practical starting point is:

  1. Select a carbon or gold screen-printed electrode platform.
  2. Immobilize antibodies specific to your target analyte.
  3. Develop a competitive assay using an electrochemically active label.
  4. Evaluate performance using amperometry, SWV, or EIS.
  5. Generate concentration-response data and assess reproducibility.

This approach provides a practical route from concept to proof-of-principle validation.

Useful Links

Screen-Printed Electrodes

https://shop.zimmerpeacock.com/en-gb/collections/bare-electrodes

Biosensors

https://shop.zimmerpeacock.com/en-gb/pages/sensors

Biosensor Electronics

https://shop.zimmerpeacock.com/en-gb/products/biosensor-single-purpose-board

Solutions for Screen-Printed Electrodes

https://shop.zimmerpeacock.com/en-gb/collections/solutions

Chemicals & Reagents for Biosensor Development

https://shop.zimmerpeacock.com/en-gb/collections/chemical-and-solutions

Talk to ZP

If you are interested in developing an electrochemical immunoassay, evaluating a new biomarker, or creating a proof-of-concept biosensor, we'd be happy to discuss your project.

📩 Contact us:
https://www.zimmerpeacock.com/contact

Explore Our Products

  • Bare Electrodes

    Bare Electrodes

    ZP Webstore

  • Sensors

    Sensors

    ZP Webstore

  • Biosensor Measurement KIt

    Biosensor Measurement KIt

    ZP Webstore

  • Buffers and Other Solutions

    Buffers and Other Solutions

    ZP Webstore

  • Chemical Solutions and Calibration Kit

    Chemical Solutions and Calibration Kit

    ZP Webstore