In this video we show the onsite, rapid detection of lead and copper in drinking water.
What You’ll See in This Video:
✅ Live sample preparation – I’ll test a water sample collected earlier from a tap on the top floor of a three-story house. ✅ Real-time analysis – Watch as the SenseItAll meter processes the sample in just 4 minutes, delivering instant results. ✅ Multi-location testing – Results from four different taps (ground floor, middle floor, and top floor) compared for lead and copper levels. ✅ Cost & efficiency benefits – Traditional lab testing can cost $200 per sample with lengthy admin, while SenseItAll offers rapid, low-cost testing (~$5 per test) with cloud-based data storage.
Key Findings:
Lead levels were below 5 ppb (parts per billion) in all tested taps.
Copper levels varied, with the highest reading at 667 ppb (0.667 ppm), still within regulatory safety limits.
Top-floor tap results: Lead – Low, Copper – 417 ppb (0.417 ppm).
Why This Matters:
Many assume their tap water is free from contaminants, but copper pipes and old infrastructure can introduce trace metals. SenseItAll makes it easy to: ✔ Test water on-site in minutes. ✔ Avoid lab delays & high costs. ✔ Store & share results instantly via the cloud.
📊 All data is saved automatically, eliminating manual record-keeping.