A weekly webinar from ZP answering technical questions from the week.
**QUESTION ONE - CONTINUOUS CREATINE SENSORS: **In this video we discuss questions that have come through on creatinine sensors.
We would like to evaluate your creatinine biosensors.
Do you have any sensors for continuous monitoring for a 1-2 week period, or are they single use?
Alternatively, can they be removed from the test solution, dried then use multiple times?
We would like to use your sensors with our own electronics.
Are you able to provide us with the signal to measurement graph?
QUESTION TWO - Integrating a ZP biosensors with a Raspberry PI or a PCI
In this video we discuss how to integrate a ZP biosensor with a Rasberry PI or a PCI Device. We also discuss sterilization and how to integrate a ZP biosensor/pH sensor into a microfermentor.
QUESTION THREE - Measuring calcium, sodium and magnesium in sea water
QUESION FOUR - Industrial biosensors for lactic acid monitoring - 5 April 2025
Question Five
I had a question about the Hyper Value 501 Carbon SPEs
We're trying to immobilize antibodies onto the SPE and so first were trying to activate it with 0.1 M H2SO4. However, I wanted to ask if there is a protocol that you recommend for activation and then one for immobilization of antibodies.
And another follow-up question, when putting redox indicator on the SPE, do you usually submerge the WE end of the SPE in the redox solution or just put drops on the WE?